One of the most asked for templates is a fill lock block template. In this example we will show you how to create a lock block template.

1. From menu Edit│Edit Templates select the default template.
2. Type in RLB in the ID space and type Right Lock Block in the description space.
3. Press the Add Button and the template editor will appear
4. Press the + sign opposite Right Final %, and the Extended template slopes - right side dialog should appear as shown below


Figure 1

5. Fill in the dialog box so that it appears similar to the one in the figure above.

We are assuming that each lock block is 0.5 meters high. Also to show how many lock blocks are required, a 0.1 meter Horizontal distance was added to the extended template. A maximum of five lock blocks stacked on top of each other are possible with this template.

6. Press OK once you have completed inputting the information into the extended templates dialog.
7. Finally put a 0 in the Right Final % space. Press OK
8. Assign the template wherever a right fill retaining wall is required.

Para retornar a página principal de Softree-Espanol

Contactenos:
Teléfono:
Fax:

Info@softree-espanol.com
(250) 337-5880
(250) 337-2063